Aver P5000 series Manual de usuario

P5000 series P5036-R/P5036-16-R User Manual V 1.0.2.0

1 Chapter 1 Hardware Introduction 1.1 Package Contents P5036-R P5036-R NVR unit USB optical mouse Key for HDD bay *Power cable Software C

91 2.11 Backup Setting Backup the recorded files to external USB pen drive. In Backup setting, user can select different channels or ti

92 5. User can backup multiple recorded file (different channels and different time period) at the same time. Repeat the above steps to create the ba

93 2.12 Alarm Setting To setup an alarm setting, user needs to complete following steps: 1. Setting up the alarm conditions (see also Chapter 2.11.1

94 4. In No. column displays the alarm setting number. The number of alarm is assigned by NVR/DVR system in default. 5. Enter alarm name and

95 7. In Camera section, select and click on the camera number in Motion, Video Loss, IVA to set the condition for the system to alarm. If IVA alarm

96 - IVA: click the camera number (01 to 36) to set the alarm condition when IVA functions are triggered. Click the Setting button to setup the syste

97 9. In System section, mark the check box to set the conditions that are caused by system. - Reboot: when the NVR/DVR system reboot without abn

98 13. To delete the alarm #, select the alarm # that user wants to delete and click Delete button.

99 2.12.2 Setting Alarm Action Setup the alarm action for system to perform when the alarm condition has been triggered. 1. Click Setup tab > Ala

100 4. The No., Name, Description, and Priority column display the current alarm’s information. The Trigger Type displays the current alarm’s trigger

2 1.2 Front Panel 1234 ○1 HDD bay ○3 LED indicator ○2 Power button ○4 USB port  LED indicator table (from left to right on front panel) LED indi

101 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the

102 - Send E-mail Send an electronic text message. Beside the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exi

103  Snapshot When send out the email, the NVR/DVR system will snapshot image of the selected camera channel.  Select Camera: Select the channel th

104 d. Then, user will see the authorization code is displayed. Keep this web page open and open a new web page. e. Enter the below URL to enter aut

105 h. Next, go to alarm action setting to setup FTP transmission via FTP (see also Chapter 2.11.2).  Upload Video Clip  Select Camera: Select th

106 8. To modify the alarm condition setting, click Setting button of Alarm # that user has created. Remember to click Apply to save the changes afte

107 2.13 User Account Setting Only administrator level authority can access User Setting. The maximum user accounts are 32. 2.13.1 Creating an User

108 4. In User Setting dialog, Select and fill in the following information.  Name: Enter the user name.  Description: Enter the user descriptio

109 5. Click Apply to save the account setting. The user account is list in User Setting list. 6. Adding another user account, repeat above steps

110 2.12.1 Deleting an User Account User can remove un-wanted or expired user account. 1. Click Setup tab in Preview mode. 2. Then, click User Sett

3 1.3 Back Panel P5036-R 21 3 4 5 6 7 8 914 13 12 11 10 ○1 Power connector port ○8 MIC input port ○2 HDMI port ○9 RS232 port ○3 3.0 USB port ○10 Au

111 2.14 I/O Setting Setup I/O device status. 2.14.1 Sensor Setting 1. Click Setup tab > Alarm Setting > Sensor tab. 2. Click the drop-down

112 2.14.2 Relay Setting 1. Click Setup tab > Alarm Setting > Relay tab. 2. Click the drop-down list and select the Relay #. 3. Enter relay

113 2.15 Emap Setting E-Map can hold up to 8 maps in *.jpg or *.bmp format. User may locate the camera, sensor and relay on the map. 2.15.1 Setting

114 3. Click Edit button to switch to Emap setup mode. 4. Then, click the Map number (1 to 8) that user want to setup. 5. Next, click icon to s

115 2.16 iPOS Setting Set from which camera screen to display the data from the POS equipment. Click Setting, to set the POS Console Setting. 1. Cli

116 5. To setup another iPOS setting, repeat the above steps. 6. To modify the iPOS setting, click the Setting button of iPOS.

117 7. To delete the iPOS, mark the iPOS and click Delete button. 8. To view the iPOS event log, refer to Chapter 2.16.3.

118 2.17 Log Viewer Show the record of activities (alarm, event, iPOS) that take place in the system. User can view and search for specific log. 2.17

119 4. To filter the logs, select and click the select Type -- System, Network, Operation, Event, or All. 5. Set the Start Date/Time and End Date/T

120 7. Click Search button to start searching. The search results are displayed in the below column. Click More button to display more event logs. 8

4 P5036-16-R 21 3 4 5 6 7 8 9 1016 15 14 13 1112 ○1 Power connector port ○9 RS232 port ○2 HDMI port ○10 Video In port ○3 3.0 USB port ○11 Video In p

121 2.17.2 Using the Alarm Log Viewer The alarm log viewer is both supported in preview and playback mode. Viewing Alarm Event Alert and display warn

122 5. Clicking Refresh button to refresh the alarm events list. 6. Double-click on alarm event can playback the event video.

123 Searching Alarm Event Logs Searching the specific alarm event. 1. Click Alarm Log icon ( ). 2. The Alarm Log Viewer dialog box is appeared and l

124 4. In Alarm Log Viewer dialog box, select the Camera that user wants to search. Multiple cameras selection is allowed. 5. Set the searching per

125 2.17.3 Using POS Log Viewer Search the iPOS event. The POS Log viewer is both supported in preview and playback mode. 1. Click POS Log ( ). 2.

126 3. In POSViewer dialog box, select the Camera that user wants to search. 4. Set the searching period at Start Date/Time and End Date/Time column

127 2.18 NVR/DVR System Tools 2.18.1 Hard Disk Calculator Estimate the hard disk recording capacity. The result of calculation is a rough value whic

128 3. In Hard Disk Calculator dialog box, enter the expect hard disk size or expect recording time in Expected HD Size(GB) or Expected Record

129 Chapter 3 Monitoring the NVR/DVR After setting up the NVR/DVR system, user can start to monitor the NVR/DVR in preview mode. The following chapte

130 3.1 Managing Camera Channels User can arrange the channel display position as user is desired. Select the camera in Camera section. Then, drag

5 1.4 Hard Disk Installation 1.4.1 Install Hard Disk inside HDD Bay The NVR/DVR unit can support up to 8 SATA hard disks to install inside HDD bay.

131 3.2 Meaning of Icons and Figures  The description of icons on each channel: The icon is indicated the current recording status. - Red color(

132 3.3 Enable/Disable the Camera Channel In Camera list, user can enable/disable camera. When camera is disabled, monitor and record function are bo

133 3.5 Enable/Disable the Sound of the Channel User can click the audio icon ( ) to mute ( ) the sound of channel. Click audio icon ( ) again to tur

134 3.7 Viewing Emap Click Emap( ) to call out the Emap dialog box. Click icon on E-map dialog box to expand the E-map dialog box on

135 3.8 Snapshot the Screen Taking a quick capture of current display screen and save in *.jpg format to external USB pen drive. 1. Plug in the USB

136 3.9 Full Screen Display View the surveillance screen in full screen display mode. In preview mode, click full screen icon ( ) to switch to full s

137 3.10 Hiding Camera List User can hide the camera list to have larger view of surveillance screen. In preview mode, click icon and the camera l

138 3.11 Auto Display Channel in Cycle Click to start channel display in cycle automatically. To stop auto cycle display, click again. If tota

139 3.12 Enable/Disable 2-Way Audio Function This function allows the NVR/DVR server site and IP camera site to talk via internet using microphone. M

140 Chapter 4 Playback Recorded Video on NVR/DVR System In this chapter, it is going to description how to playback recorded video on NVR/DVR system

6 5. Slide HDD bay back to NVR/DVR unit and push to close the door of HDD bay. User can lock the HDD drawer by using the key that is included in acce

141 4.2 Playback the Specific Date/Time Period User can select the specific date and time period to playback. 1. In playback mode, click Calendar (

142 4.3 Using Event Search to Playback the Event In playback mode, user can use Event Search to find the specific event to playback. 1. Select the c

143 5. When the Event list appears, click and select the item user wants to view; but not all the events can be playback such as Sensor. 6. To close

144 4.4 Using Visual Search to Playback the Specific Time In playback mode, user can use Visual Search to find the specific time to playback. 1.

145 5. When a series of frames appear by date, click on the frame to display another series of frames and search by every 2 hours of that date, every

146 4.5 To Bookmark a Section of the Video for Playback User can bookmark a specific time of video section. 1. Using the mouse to move the

147 4. Select and click one in the bookmark list to review the file. 5. To modify the bookmark, select the bookmark and click Edit button. 6. To d

148 4.6 Playback Mode Management 4.6.1 Managing Channel Display Position User can arrange the channel display position that user is desired. Select

149 4.6.2 Enable/Disable Sound of the Channel First, switch to single screen display mode. Then, Click the icon on the channel screen to disable t

150 4.6.3 Switching Multiple Screen Display to Single Screen Display In multiple screen playback mode, user can double-click on the channel screen to

7 1.4.1 Install Internal Hard Disk The NVD/DVR unit can support up to 2 internal SATA hard disks. Follow the instructions below to install the hard d

151 4.6.4 Full Screen Display View the playback screen in full screen display mode. In playback mode, click full screen icon ( ) to switch to full sc

152 4.6.5 Hiding Camera List User can hide the camera list to have larger view of surveillance screen. In playback mode, click icon next to previe

153 4.6.6 Output a Video Clip to a USB Pen Drive 1. Switch the playback screen to 1 single screen display mode. 2. Using and button to expand t

154  End Date/Time: Displays the end time and date of segment video file.  Video Format: Select the file format -- *.DVR or *.MP4.  Save path: W

155 4.6.7 Snapshot the Screen View 1. Select the channel or all channels. 2. Plug the USB pen drive to NVR/DVR unit. 3. Click Snapshot ( ) button.

156 Chapter 5 Playback by Qplayer You can playback the backup files by using QPlayer applications on the PC. When you back up the recorded file, QPla

157 5.1 Familiarizing Functions of Qplayer In Qplayer main UI, click File > Open File to located the backup file folder. Please copy the whole ba

158 Name Function (5) Export Export function includes 2 functions – Snapshot and Print. - Snapshot: Catch a static current screen image and save it a

159 Name Function (10) Power button Call up the Power dialog box. In the Power dialog box, user may do the following: - Exit: To shutdown the NVR/DV

160 Name Function (16) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. Using the Z

8 5. Slide hard disk box back to NVR/DVR unit 6. Connect the SATA cable and power cable to hard disk. 7. Close cover case of NVR/DVR unit and s

161 5.1.1 To Bookmark a Section of the Video for Playback User can bookmark a specific time of video section. 1. Using the mouse to move the playb

162 4. Select and click one in the bookmark list to review the file. 5. To modify the bookmark, select the bookmark and click Edit button. 6. To

163 Chapter 6 Using the PCViewer User can use Microsoft Internet Explorer to access NVR/DVR system by entering the IP address. To use th

164 6.1 Familiarizing Functions of PCViewer (1)(2)(3)(4)(5) Name Function (1) Camera list Lists all cameras. Click the camera # to view in single scr

165 Appendix USB Recovery Save the firmware on USB pen drive and through the USB port on NVR/DVR unit to recovery the firmware of NVR/DVR system. All

166 7. After all procedures have completed, the Reboot window is show up. Remove the USB pen drive from NVR/DVR unit and click Reboot button to resta

167 WARRANTY NOTICE LIMITED WARRANTY AVer Information, Inc. warrants this product to be free of defects resulting from faulty manufactur

168 EXCLUSION OF DAMAGES THE MANUFACTURER’S SOLE OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF A DEF

9 1.5 Pin Definition of Sensor/Relay/RS485 Port The I/O card enables you to connect 8 sensor inputs and 4 relay outputs. Just connect the external se

10  Alarm Pin definition Pin Definition Pin Definition C1 Relay Common 1 C3 Relay Common 3 NO Relay Normal Open NO Relay Normal Open C2 Relay Comm

FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may no

11 Chapter 2 Main System Configuration 2.1 Getting Started 1. Connect the power cable and mouse to NVR/DVR unit. 2. Power on the NVR/DVR unit and

12 5. Next, setup the following settings in order to start monitoring.  Setup System Date and Time: Setup the date and time in order to have correc

13 2.2 Familiarizing Functions in Preview Mode (1)(2)(3)(4)(8)(5)(6)(7)(9) (10) (11) (12) (13)(14)(15)(16)(17) Name Function (1) Setup Click Setup bu

14 Name Function (7) POS Log Viewer Search and display POS event logs (see also Chapter 2.16.3). (8) Date and Time It shows the current system date an

15 Name Function (17) Alarm Log Viewer Alarm log: To view and search the alarm event logs (see also Chapter 2.17.2).

16 2.3 Familiarizing Functions in Playback Mode Click playback tab to switch to playback mode. (1)(2)(3)(4)(10)(5)(6)(7)(8)(9)(11) (12) (13) (15)(14)

17 Name Function (6) Search NVR/DVR supports 2 type of searching in playback mode – Event Search and Visual Search. - Event Search: Search from the r

18 Name Function (10) Date and Time It shows the current date and time. (11) Playback Switch to Playback mode. This allows you to view the recorded vi

19 Name Function (19) Power button Call up the Power dialog box. In the Power dialog box, user may do the following: - Exit: Shutdown the NVR/DVR sy

20 Name Function (24) / (Zoom in/ out) To expand the playback time bar from an hour to minute. (25) Minimize Click to close up the progress bar. Cl

COPYRIGHT © 2014 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted in an

21 2.4 Compact Mode The preview and playback are both supported compact mode. To switch to Compact mode, click power button (located at upper right c

22 2.4.1 Familiarizing Function in Preview Compact Mode (2)(1) (3) (4) (5)(6)(7)(8) Name Function (1) Setup Click Setup button to configure settings

23 Name Function (4) Full screen Use the entire area of the screen to only display the video. To return, click the arrow icon at bottom of right. W

24 2.4.2 Familiarizing Function in Playback Compact Mode (2)(1) (3) (4) (5) (6)(7)(8)(9)(10)(11)(12)(13)(14) Name Function (1) Setup Click Setup butt

25 Name Function (3) Full screen Use the entire area of the screen to only display the video. To return, press the right button of the mouse or ESC on

26 Name Function (5) Bookmark Mark a reference point when reviewing the recorded video file to which you may return for later reference (see also Chap

27 Name Function (12) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. Using the Zo

28 2.5 System Setup Click Setup tab in preview/playback mode to switch to system setup mode. In Setup mode, user should see the System Information di

29 2.5.1 General System Setting Setup the language of NVR/DVR system, video type, system date and time, synchronize the system time. Click Setup tab

30 2.5.2 System Advanced Setting In Advanced of System Configuration, user can setup the daylight saving time, system login setting, and some other s

Contents CHAPTER 1 HARDWARE INTRODUCTION ... 1 1.1 Package Contents ...

31 2.5.2.1 Daylight Saving Time Setting User can setup daylight saving mode as user is desired. 1. Select the mode of Daylight saving.  Mode 1:

32 2.5.2.2 Customizing System Login Setting Enable the conditions in Login section you want the system to automatically carry out. Click Apply to sav

33 2.5.3.3 Customizing System Miscellaneous Setting Enable the conditions in Miscellaneous section you want the system to perform. Click Apply to sav

34 2.5.4 Update/Export/Import In Configure Update, user can import the backup configure file to NVR/DVR system and export the configure file to exter

35 2.5.4.1 Importing NVR/DVR System Configuration To regain the same settings back from previously backup configuration file. 1. Plug the USB pen dr

36 2.5.4.2 Exporting NVR/DVR System Configuration Backup a copy of all the settings and allows you to regain the same settings back. 1. Plug in the

37 2.5.4.3 Upgrading NVR/DVR Firmware To update the firmware of NVR/DVR system. 1. Plug the USB pen drive that contains the NVR/DVR firmware file. T

38 2.5.4.4 Upgrading IP Camera Module Patch To update the firmware of NVR/DVR system. 1. Plug the USB pen drive that contains the IP camera patch fi

39 2.5.5 Setup Dual Monitor The NVR/DVR system support dual monitor connection. User can choose the function UI to display on second monitor. In def

40 2.5.6 Reset to Factory Default Reset the NVR/DVR system back to factory default value. All configurations will be lost after reset to factory defa

2.5.2 System Advanced Setting ... 30 2.5.2.1 Daylight Saving Time Setting ...

41 2.6 Network Setting Select type of IP mode, setup the IP address of NVR/DVR, and configure the DDNS. 1. Click Setup tab > System Setting; cli

42 gateway IP address - DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP addresses. Enter the IP address of DNS if it i

43 2.6.1 Setup NVR/DVR Server Name Assign a name for the NVR/DVR system. Alphabet letters and numbers only. 1. Click Setup tab > System Setting;

44 2.6.2 Network Advanced Setting User can setup camera transmitting, UPnP function, bandwidth limit setting, and network port setting. Click Setup

45 2.6.2.1 Setup Transmitting Camera Select and click on the camera number in the Transmitting Camera section you want to make it accessible via inte

46 2.7 Storage Setting In storage setting, user can add the storage path, remove the storage path, format hard disk, and set the hard disk recycle ti

47 2.7.1 Formatting Hard Disk Follow the steps below to format the hard disk for first time installation or re-format the hard disk to the type that

48 2.7.2 Creating RAID Drive RAID (redundant array of independent disks) is a storage technology that combines multiple disk drive components into a

49 Follow the below steps to build an RAID storage. 1. In Storage Setting page, click Create RAID button. 2. In Create RAID page, select hard disks

50 3. Then, select the RAID type (Step B). There are some rules for each RAID type; therefore read the description of each RAID type before choosing.

2.8 Camera Management ... 57 2.8.1 Connect the Analog Camera ...

51 8. Click Detail button of RAID drive, it displays the hard disks location of RAID on NVR/DVR unit and related information. [Not]  When the word

52 2.7.3 Setup Storage Path for Recording Data - Without storage path, the NVR/DVR system won’t be able to record. - After storage path is added, th

53 2. The selected hard disk, RAID drive, or iSCSI HDD will be added into Use for Recording HDD section. 3. To remove the hard disk or RAID drive, s

54 2.7.4 Setup Hard Disk and Event Log Recycle Time  Delete Recorded Data After Days: If user wants the system to automatically erase the data afte

55 2.7.5 iSCSI Setting Connect the iSCSI server on your network to use as a storage path for saving recorded data. 1. Enter the following informati

56 4. Click Storage tab, user will see the iSCSI HDD is listed in Detected HDD section. 5. To format iSCSI HDD, select it and click Format button. 6

57 2.8 Camera Management Connect and configure the camera channels. The total camera channels are up to 36. Click Setup tab > Camera Setting.

58 2.8.1 Connect the Analog Camera 1. Connect the DVI cable to the video in port of NVR/DVR. 2. Connect the analog camera to the DVI cable

59 2.8.2 Connect the IP Camera 1. Click Setup tab > Camera Setting. 2. In Camera Information page is divided into 4 areas –Camera List, Capacity

60 3. Click Search button to find IP cameras on LAN network. 4. In Search result list, select the IP camera that user wants to connect. Then, select

2.9 Record Management ... 87 2.10 Alarm Schedule Setting ...

61 6. After connection is successful, user should see the live video is displayed. 7. Also, user can enter the following data in Camera Information

62 2.8.2.1 Use Active IP Function The Active IP function allows user to configure the AVer IP camera series’ IP mode, IP address, subnet mask, gatewa

63 3. In Active IP dialog box, user can change IP mode of the IP camera and configure related parameters. 4. After configuring, click OK to save th

64 2.8.3 Camera Detail Configuration User can configure the IP camera’s stream settings and related parameters. Click Setup tab > Camera Se

65  Basic  Video Adjustment: Configure the Brightness, Contract, Hue, Saturation, and Sharpness of IP camera.  IP Camera: Enable/disable

66  Preference In Preference page, user can tune the IP camera white balance, select display color or black & white, set the flicker frequency,

67  Denoise: Select Disable/2D/3D/Auto to reduce the excessive noise on the video image. Select Auto and set the Sensitivity level.  AE Profile

68  Exposure In Exposure page, user can set the exposure area, exposure mode, and calibrate the DC Iris. After completing the setting, click Apply t

69  Stream User can setup Codec, Resolution, FPS, Bitrate Mode, and Quality of Stream 1 on the IP camera channel. The Stream 1 is enabled in default

70  ROI ROI stands for Region on Interest. It helps users to optimize bandwidth and storage. Users can select 1 or 2 key area(s) to transm

CHAPTER 3 MONITORING THE NVR/DVR ... 129 3.1 Managing Camera Channels ...

71  Smart Stream Smart Stream optimizes bandwidth and storage space by increasing or decreasing quality for selected areas based upon criticality. U

72  Privacy Mask In Privacy Mask page, user can enable 3 privacy masks. Simply adjust the size and position the mask on the area user wants to conc

73  Motion Detection In the motion detection page, the frame will blink when the motion detected has reached the percentage threshold setting. This

74  IVA Form drop-down list select the IVA function – Cross detection, Tampering, Missing object, or Suspicious object.

75 Cross Detection Cross detection function detects moving objects that cross the virtual lines that user has set up in IP camera application and to t

76 Tampering Select Enable tamper detection to enable tampering function. And, alarm will trigger when the following situation has occurred.  Spray-

77 Missing Object Select a certain object on the screen for the camera system to detect; System gives alarm when the object disappears. 1. Select t

78 Suspicious Object Suspicious Object is an unusual object appears on the screen. 1. Select the Suspicious Object from the drop-down list. 2. A red

79  Sensor Setup the sensor of IP camera. 1. In Camera Management dialog box, click Sensor tab. 2. Click the drop-down list and select the sensor

80  Relay Setup the relay of IP camera. a. In Camera Management dialog box, click Relay tab. b. Click the drop-down list and select the relay ID n

4.6.4 Full Screen Display... 151 4.6.5 Hiding Camera List ...

81  MFZ - The IP camera has motorized lens can perform MFZ function(motorized focus and zoom). - The MFZ setting only support for IP camera. To a

82 Name Function Continuous zoom out Press to zoom out continuous. Reset To reset the zoom back to the center of screen view in default

83  PTZ Function User can enable PTZ function if the IP camera has supported. 1. In Camera Management dialog box , click Setup tab 2. Then, sele

84 5. DwellTime: for how long the camera stays in that position before it moves to the next one (the setup time period is 1~60 seconds). After is don

85 2.8.3 Familiarizing Functions on PTZ Control Panel User can control PTZ camera through PTZ control panel in preview mode. Enable and set up the PT

86 2. The functions’ description of PTZ control panel is as following. (5)(6)(7)(4)(3)(2)(1)(9)(8) Name Function (1) Camera preset position number Mo

87 2.9 Record Management - The recording schedule is always record in default. - If the storage path is not set, the NVR/DVR system couldn’t recor

88 - Event Recording Start recording the video from the selected camera only when the system detects movement. Once a motion is detected, the system

89 7. After selecting the recording mode, select date and time on date time table. 8. If user wants to apply this record schedule to other or all

90 2.10 Alarm Schedule Setting Setting up the schedule for alarm action that user has setup in Alarm setting (see also Chapter 2.12). According to th