Aver EXR6004-Mini user manual Manual de usuario

Oct. 2012 EXR6004 Mini 4CH Pure NVR User’s Manual

4 1.4 Setting Up the DVR Unit 1.4.1 Installing the Hard Disk i - For hard disk spec, please referring to http://surveillance.aver.com/download-cent

5 5. Secure the hard disk inside the unit then place unit cover 6. Push the cover forward and secure the cover 7. You may now connect all the

6 1.4.2 Connecting Devices The back panel of the DVR unit, user can connect the 4 sensor devices, 1 alarm device, audio input/outpu

7 1.4.3 Connecting the Audio, Sensor and Relay Device The Sensor, Alarm, and audio port enable you to connect 4 sensor inputs, 1 relay outputs, and

8 Chapter 2 Operating the DVR unit 2.1 First Time Using the DVR Unit 1. Connect the mouse to the USB port located at front panel of the DVR unit. 2

9 2.1.1 Using the Virtual Keyboard User can use the Virtual Keyboard when the keyboard is not available. Just click or right-click screen to call

10 2.2 Familiarizing the Buttons in Preview Mode Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box, you may do the f

11 Name Function (15) Full screen View in full screen. To return, press the right button of the mouse or ESC on the keyboard or click

12 2.2.1 Setting Up and Using the Emap E-Map can hold up to 8 maps in *.jpg format. You may locate the camera, sensor and relay on the map. 2.2.1.1

13 2.2.2 Familiarizing the Buttons in PTZ Camera Controller (1)(11)(2)(3)(4)(5)(6)(7)(8) (9) (10) Name Function (1) Close Exit PTZ camera controll

FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device ma

14 2.2.2.1 Setup the IP PTZ Camera When IP PTZ camera has successful connected with the DVR system, user can use the PTZ function directly without a

15 2.2.3 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main inte

16 2.3 Familiarizing the Buttons in Playback Mode To switch in Playback mode, click Playback button at the lower right corner of Preview mode user in

17 Name Function (4) Playback Control Buttons Faster: Play the recorded video file at the speed of 2X, 4X, 8X, 16x, 32x, or 64x. Next: Go to the next

18 Name Function (13) Event log Show the record of activities that take place in the system. To filter the records, select and click the option butto

19 2.3.2 To Bookmark a Video Section 1. Click Bookmark button 2. In the Bookmark dialog box, you may do the following: - Add to create the new re

20 2.3.3 Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search Setting dialog

21 Chapter 3 Customizing the DVR System In the Preview screen mode, click button to customize your DVR. Enter the ID and password to authenticate

22 (2) Delete recorded data after If you want the system to automatically erase the data after a certain days, enable the Delete recorded data after

23 (7) Touch Monitor When DVR server is connected with touch monitor, user needs to adjust touch monitor in order to work normally. 1. Connect the t

WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE

24 Automatically start network connection when the DVR is executed. - Default user Automatically log in to the selected default user when the DVR

25 (11) Firmware  Product Version Update: Upgrading the firmware of DVR system. 1. Click Update button, a Firmware Upgrade window will show up. 2

26 3.2 Camera Setup Click Default will back to the factory default value. 3.2.1 To Setup the IP Camera (1)(2)(3)(4)(5) (1) Camera Icons Select the

27 1. IP Setting: Click IP setting to call out IP camera setting window. 2. Click the radio button of Protocol to start setup IP camera. 3. Selec

28 of Stream 2and Stream 3 on the selected IP camera channel. The Stream 1 is stetted in default.  Stream Selection: user can setup which stream

29 3.2.1.1 Using Search Device to Connect IP Camera The Search Device function help user to find the IP cameras on your LAN network that can be dete

30 the IP camera, a warming message dialog is popup and click OK to continue it. In IP setting window, user can configure IP camera’s IP,

31 3.2.2 To Setup Camera from the Remote DVR User can add the camera from another DVR through the network. (1) Camera Icons Select the camera numbe

32 Select the channel of connected camera - Connect Click to connect the camera when all configurations are set. 3.3 Recording Setup (1) Camera Ic

33 Once a motion is detected, the system automatically saves the previous frames and stop based on the Start Record Prior and Stop Record After setti

Table of Contents Chapter 1 Introduction ... 1 1.1 Package Co

34 3.4 Network Setup Click Default will back to the factory default value. (1) Server Name Assign a name for the DVR unit. Alphabet letters and num

35  Using the following IP address: Assigns an IP address for the DVR system. Fill in the IP related parameters in IP information section. - IP: Ass

36 (7) Other Configuration - UPnP Enable UPnP function to automatically map the port setting of PCViewer to the router on the local network. This fu

37 3.5 Schedule Setting Schedule to record, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 0

38 3.6 Backup Setting In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 04 repr

39 3. In Select Camera, select the channels or select All channels to backup. 4. If user wants to know the total backup file size, click Calculate

40 3.6.1 Using QPlayer to Playback Backup Video You can playback the backup files using QPlayer applications on the PC. When you back up the recorde

41 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slowe

42 Name Function (16) Event Search Search from the recorded activities that were recorded in event log (i.e., Sensor, Motion, Video Loss). (See also

43 3.6.2 To Cut and Save the Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pau

3.9 Alarm Setting ... 47 3.10 User Set

44 3.6.4 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text

45 3.7 Sensor Setting The I/O device must be installed to use this function. 1. The system automatically detects the I/O device that has connected

46 3.8 Relay Setting The I/O device must be installed to use this function. 1. The system automatically detects the I/O device that has connect

47 3.9 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm setti

48 - Video Loss: click the camera number (01 to 04) to set the alarm condition when video is lost. Click the Detail button to setup the system to s

49 - Enlarge Camera View Switch to only display video in Preview mode from where the alarm is activated. a. Select the camera from drop down list to

50 - Send E-mail Send an electronic text message. Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to ex

51 - Start Recording Record the video from the selected camera. 1. Next to the Start Recording check box, click Detail. 2. In the Alarm Recordin

52 3.10 User Setup Only administrator level authority can access User Setting. The maximum user accounts are 32. In the User Setting dialog box, cli

53 (1) Authorization level Select the status of the user. (2) Control Right Enable the items that would allow the user to access. (3) PCViewer Enable

54 Chapter 4 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature

55 4.1 Familiarizing the Buttons in PCViewer 4.1.1 PCViewer Screen Right-clicking on the PCViewer video screen, enables you to start video recordin

56 4.1.2 PCViewer Control Panel Name Function (1) Select cameras to view Select to the view camera from different server. In Select Camera dial

57 Name Function (7) Event Log Viewer Display the Event logs, Operation logs, System logs, and Network logs. (8) Split screen view Select from fo

58 4.1.3 To Setup Remote System Setting The setting here applies to Remote DVR only. Click the selection to configure. 4.1.3.1 System Setting In t

59 Play the last file: Automatically playback the video from the last hour Instant Playback: Automatically playback the video which has just recorded

60 4.1.3.2 Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting window, click Update to save and apply

61 (5) IP Camera Information Click IP Setting to setup the parameters of the IP camera. 1. Select the Protocol, Model, Video Format, and Channel

62 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting window, click Update to save and apply the new settings, cli

63 4.1.3.3 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default t

1 Chapter 1 Introduction AVerTM EXR6004 Mini brings you the new version of pure NVR. With Compact size, it provides 4 channel video and audio inputs

64 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco

65 4.1.3.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click

66 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

67 4.1.3.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm s

68  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sys

69 - Send E-mail Send an electronic text message. Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to ex

70 - Send to CMS (Central Management System) Enable/disable the selected camera to send video to CMS when the alarm is activated. Next to the Send t

71 4.2 Familiarizing the Buttons in Remote Console Name Function (1) Exit Close the Remote Console. (2) Split Screen Mode Select from 1 or 4-

72 4.2.1 To Setup Remote Console Setting Click Setup button to call out the System Setting window. Click OK to exit and save the setting and Cancel

73 4.2.2 Familiarizing the Buttons in PTZ Camera Controller (1)(10)(2)(3)(4)(5)(6)(9)(8)(7) Name Function (1) Close Exit PTZ camera controller. (2)

2 1.2 Front Panel Name Function (1) DVR Power LED Light when the unit is power on (2) HDD LED Indicate the hard disk running state. Light when t

74 4.3 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, cho

75 4.3.1 Familiarizing the Buttons in Local Playback Name Function (1) Split Screen Mode Select from 1 or 4-split screen type to playback the re

76 Name Function (5) Playback Control Buttons From left to right order: Begin: Move at the beginning of the recorded video file. Previous: Go back to

77 Name Function (12) Segment Keep a portion of the recorded video you want (see also Chapter 6.3.1.1). (13) Full screen View in Playback-compact mod

78 4.3.2 Familiarizing the Buttons in RealTime Playback Name Function (1) Split Screen Mode Select 1 or 4-split screen type to playback the recor

79 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN FI

80 4.3.3 Familiarizing the Buttons in Download and Playback Name Function (1) Exit To close the application. (2) Progress bar Show the progress o

81 Chapter 5 Using Mobile Device to Access DVR Server 5.1 Using PDAViewer to Access DVR Server Users can also use a PDA to acce

82 5.1.2 To install PDAViewer from the Internet Make sure you are connected to the internet. 1. Open the web browser and enter the server IP. Then

83 5.1.3 To Use the PDAViewer 1. Run the PDAViewer in the Programs. 2. Familiarizing the PDAViewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(2) Name

3 1.3 Back Panel Name Function (1) 2* USB 2.0 ports For USB keyboard, mouse, and other USB devices connection. (2) VGA Out Output the video signa

84 3. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the popup menu will

85 5.1.4 To Playback in PDAViewer 1. Run the PDAViewer in the Programs. 2. Hook up to the DVR server. 3. Click Connect icon and select the DVR se

86 5.2.2 To Use the JavaViewer 1. Run the JavaViewer program. 2. Enter the DVR IP address, port number, user ID, and password. Please refer to yo

87 Chapter 6 Web Tools The bundled Web Tools includes Dispatch Server , Remote Backup, and Remote Setup program. To install Web Tools, place the CD

88 - Password: fill in the remote DVR server’s login password - Description: fill in a short description for the remote DVR server 3. Click OK to

89 6.2 Remote Backup Remote Backup is purely for backing up the *.dvr file from the DVR sever. You can select between Auto Backup and Manual Backup.

90 - Enable/disable Disk Recycle check box, to automatically overwrite the oldest file when there is not enough free space to backup the file. Manua

91 8. For manually backup, click File select button and select the DVR to backup.

92 Appendix A Registering Domain Name DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for tr

93 WARRANTY NOTICE LIMITED WARRANTY AVer Information, Inc. warrants this product to be free of defects resulting from faulty manufacture or component