Aver EH1116H-4 Nano user manual Manual de usuario

EH1000H-4 Nano/Nano+ 4/8 CH Embedded Hybrid DVR User’s Manual Oct. 2011

4 1.2.2 EH1004H-4 Nano+/EH1008H-4 Nano+ Name Function (1) System Power indicator System power status indicators. Indicate running state of system.

94 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the

95 recording after the alarm has ended. The time range is 1~999 seconds. If user doesn’t mark and set the time, the alarm recording will continue rec

96 6.2 Familiarizing the Buttons in Remote Console Name Function (1) Exit Close the Remote Console. (2) Split Screen Mode Select from four(4) dif

97 6.2.1 To Setup Remote Console Setting Click Setup button to call out the System Setting windows. Click OK to exit and save the setting and Cancel

98 6.2.2 Familiarizing the Buttons in PTZ Camera Controller (1)(10)(2)(3)(4)(5)(6)(7)(8) (9) Name Function (1) Close Exit PTZ camera controller. (2)

99 6.3 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, choos

100 6.3.1 Familiarizing the Buttons in Local Playback Name Function (1) Exit To close the application (2) Split Screen Mode Select from four(4)

101 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slow

102 6.3.1.1 To Cut and Save the Wanted Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress b

103 6.3.2 Familiarizing the Buttons in RealTime Playback Name Function (1) Exit To close the application (2) Split Screen Mode Select from 6 diff

5 Name Function (12) Move the mouse cursor to left. Move the mouse cursor to right. Move the mouse cursor up. Move the mouse cursor down. (13)

104 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. - Channe

105 6.3.3 Familiarizing the Buttons in Download and Playback Name Function (1) Exit To close the application. (2) Progress bar Show the progress

106 Chapter 7 Using Mobile Device to Access DVR Server 7.1 Using PDAViewer to Access DVR Server Users can also use a PDA to access the DVR through

107 7.1.2 To Use the PDAViewer 1. Run the PDAViewer on your PDA. 2. Familiarizing the PDAViewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(2) Name Func

108 3. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the pop-up menu wil

109 7.1.3 To Playback in PDAViewer 1. Run the PDAViewer in the Programs. 2. Hook up to the DVR server. 3. Click Connect icon and select the DVR s

110 7.2 Using JavaViewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure you

111 7. The JavaViewer support PTZ control function. If the camera has enabled PTZ function, the camera name has a word “PTZ”. Usi

112 Chapter 8 Using the Web Tools The bundled Web Tools includes Dispatch Server, Remote Backup, and Remote Setup program. To install Web Tools, pla

113 remote DVR server. The default is 80. - User ID: fill in the remote DVR server’s login account - Password: fill in the remote DVR server’s logi

6 1.3 Back Panel 1.3.1 EH1004H-4 Nano/EH1004H-4 Nano+ Name Function (1) Video Input 1~4 Input the video camera signal (channel 1 ~ 4). (2) Spot

114 8.2 Remote iBackup Remote Backup is purely for backing up the *.dvr file from the DVR sever. You can select between Auto Backup and Manual Backu

115 5. Select the Backup mode: Auto Backup mode: the backup will automatically execute when the setup is completed - In Begin Date drop down calend

116 8. For manually backup, click file select button and select the DVR to backup.

117 Appendix A Registering Domain Name DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating doma

118 Appendix B Network Service Port The following table shows the ports that DVR server uses for certain network service. Port# Variable Remot

WARRANTY NOTICE LIMITED WARRANTY AVer Information Inc. warrants this product to be free of defects resulting from faulty manufacture or components

7 1.3.2 EH1008H-4 Nano/EH1008H-4 Nano+ Name Function (1) Spot Monitor Outputs the analog video signals to SPOT monitor when receive the alarm even

8 1.4 Setting Up the DVR Unit 1.4.1 Installing the Hard Disk i - For hard disk spec, please referring to http://surveillance.aver.com/download-cen

9 5. Hold the cover and connect the power cable and SATA cable to the hard disk. 6. And then, turn the cover over carefully. 7. Hold the cover

10 1.4.2 Connecting Devices Pen drive and external hard disk must be FAT32 format. i - All connected devices have its own power supply is necessar

11 EH1008H-4 Nano/EH1008H-4 Nano+ i EH1008H-4 Nano only supports first 4 channels for IP camera connection. The back panel of the DVR unit, user can

12  EH1000H-4 Nano/EH1000H-4 Nano+ For backup recorded video, plugging the pen drive or external hard disk through USB port that are located at fro

13 1.5 Sensor, Relay and RS485 pinhole allocation The Sensor and Alarm enable you to connect 4 sensor inputs, 1 relay outputs and PTZ cameras. Just

FCC NOTICE (Class A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may n

14 1.5.4 RS485 Pin Definition When connect PTZ camera through RS485 interface, please refer to the following pin definition to connect the DVR and P

15 1.6 Familiarizing the Remote Control Buttons Use the Remote control to operate the DVR unit. Name Function (1) Switch to playback mode (2) S

16 Name Function (14) To enable auto pan function. (15) To move the PTZ camera to the preset position. Press button and the “PS+” will show

17 Chapter 2 Using the DVR Software 2.1 First Time Using the DVR Unit 1. Connect the mouse to DVR unit (through USB port). 2. Connect all neces

18 c. Select the hard disk from list. d. Click Format button and click Start to begin formatting e. When formatting is done, click OK. 6. Adjust t

19 c. Select Input as IP Camera. d. In Camera section, mark Display to allow the live video of camera to display on surveillance screen. Then, ente

20 2.2 Familiarizing the Buttons in Preview Mode Name Function (1) Logout - Reboot: To restart the DVR system. It is required to enter the passwo

21 Name Function (10) Status bar Display the current date, time, hard disk free space and temperature of unit. (11) Camera ID Show the number of ca

22 2.2.1 Setting Up and Using the Emap E-Map can hold up to 8 maps in *.jpg format. You may locate the camera, sensor and relay on the map. To Set U

23 2.2.2 Familiarizing the Buttons in PTZ Camera Controller (1)(11)(2)(3)(4)(5)(6)(7)(8) (9) (10) Name Function (1) Close Exit PTZ camera controll

WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE

24 2.2.2.1 Setup the Analog PTZ Camera 1. Select the channel of analog PTZ camera on Preview UI. 2. Click PTZ button from preview UI. And then, t

25 2.2.2.2 Setup the IP PTZ Camera When IP PTZ camera has successful connected with the DVR system, user can use the PTZ function directly without

26 2.2.3 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main in

27 2.2.3.1 Using POSViewer To clear all setting, click Reset button. Click Close button will exit POSViewer window. (1)(2)(3)(4)(5) Name Function

28 2.3 Familiarizing the Buttons in Playback Mode To switch in Playback mode, click Playback button at the lower right corner of Preview mode UI. N

29 Name Function (5) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. i The numbers

30 Name Function (18) Turbo To improve the smoothness of live video. The default is enabled( ), but in following situation: - The channel is IPCam a

31 2.3.1 To Cut and Save a Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pause

32 2.3.2 To Bookmark a Video Section 1. Click Bookmark button 2. In the Bookmark dialog box, you may do the following: - Add to create the new re

33 2.3.3 Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search Setting dialog

Table of Contents Chapter 1 Introduction ... 1 1.1 Pa

34 Chapter 3 Customizing the DVR System In the Preview screen mode, click button to customize your DVR. When the DVR configuration setup selectio

35 (2) Delete recorded data after If you want the system to automatically erase the data after a certain days, enable the Delete recorded data after

36 5. Click + one by one to complete the adjustment. 6. To disconnect touch monitor, click Disconnect button first, and then, turn off the power o

37 2. In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without saving the new setting. (1)(2)(3)(4)(5)(6)(7) (1) Na

38 Date Format Select the date format which wants to display in select date and time playback mode Auto Scan Period Set the time gap of the Auto

39 - Daylight Bias: Assign a time that it is for daylight saving time offset in your time zone. For example: if the time zone is in U.S. Eastern, t

40 3.2 Camera Setup The DVR system supports 8 cameras in combination of analog and IP cameras or only analog cameras. The DVR system only supports f

41 To setup IP camera and display current IP camera information. Using IP Camera Motion: Enable to use the motion detection function of IP camera i

42 I/O Control: Setup the sensor and relay that is embedded on the IP camera.  Sensor Setting 1. Click Sensor button. 2. Click the drop-down list

43 3.2.2 To Setup Analog Camera Click Default will back to the factory default value. (1) Camera Icons Select the camera number you want to view. T

3.2.2 To Setup Analog Camera... 43 3.2.3 To Setup Ca

44 3.2.3 To Setup Camera from the Remote DVR User can add the camera from another DVR through the network. i EH1004H-4 Nano/Nano+ and EH1008H-4

45 3.3 Recording Setup 3.3.1 Setup IP Camera Record Setting (1) Camera Icons Select the camera number you want to set the recording setting. To se

46 (3) Motion Detection Adjust the sensitivity of the motion detection. The higher the value, the finer the sensitivity is detected. When it detects

47 (3) Motion Detection Adjust the sensitivity of the motion detection. The higher the value, the finer the sensitivity is detected. When it detects

48 3.4 Network Setup Click Default will back to the factory default value. (1)(2)(3)(4)(5)(6)(7) (1) Server Name Assign a name for the DVR unit. Alp

49 Enter the IP address of DNS if it is available. - MAC Address: An identifier hardware address of DVR unit that is assigned by the manufacturer for

50 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

51 3.5 Schedule Setting Schedule to record, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 0

52 3.6 Backup Setup i While backup, the CPU usage will be near to 100% and might slow down the DVR system response. In the Backup Setting dialog box

53 3.6.1 Using QPlayer to Playback Backup Video You can playback the backup files by using QPlayer applications on the PC. When you back up the reco

6.3.1 Familiarizing the Buttons in Local Playback ... 100 6.3.1.1 To Cut and Save t

54 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. 1. OPEN FI

55 Name Function (13) Find Next Search for the next event or changes in the motion detector frame. You can use this when you are using Intelligent Se

56 3.6.3 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text

57 3.7 Sensor Setting The I/O device must be installed to use this function. 1. Click the drop-down list and select the sensor. 2. Enter senso

58 3.8 Relay Setting The I/O device must be installed to use this function. 1. Click the drop-down list and select the relay. 2. Enter relay n

59 3.10 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm sett

60  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sys

61 - Enlarge Camera View Switch to only display video in Preview mode from where the alarm is activated. a. Select the camera from drop down list to

62 - Send E-mail Send an electronic text message. Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to ex

63 number in second for the program to continue recording after the alarm has ended. The time range is 1~999 seconds. If user doesn’t mark and set th

1 Chapter 1 Introduction 1.1 Package Content 1.1.1 EH1004H-4 Nano (1) (2) (3) (4) (5) (6) (7) (1) EH1004H-4 Nano unit (2) Quick Instal

64 3.11 User Setup Only administrator level authority can access User Setting. In the User Setting dialog box, click Add to insert a new user, Dele

65 (1) Authorization level Select the status of the user. (2) Control Right Enable the items that would allow the user to access. (3) Web Viewer Enab

66 Chapter 4 Using the UPC to Playback Backup File 4.1 Recommended System Requirements Pentium®4 2.4GHZ or above Windows®2000/ XP/Vista/7 DDR

67 4.3 Familiarizing the Buttons in USB Playback Console To run the application, click the icon on the PC desktop Name Function (1) Split Screen Mo

68 Name Function (6) Archive To select the video file source for playing. 1. DVR Recorded File (HD): To playback the recorded video from the hard

69 4.3.1 To Cut and Save the Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pau

70 4.3.3 Playback Backup File(*.dvr) 1. Click Archive button. 2. Select Backup File(*.dvr) and click OK. 3. The Select File Type window will sho

71 4.3.4 To Backup Recorded File HDD backup function allows user to backup recorded file from hard disk. 1. Click Advanced → HDD Backup on USB Pl

72 4.3.5 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the

73 4.3.6 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text

2 1.1.3 EH1008H-4 Nano (1) (2) (3) (4) (5) (6) (7) (8) (1) EH1008H-4 Nano unit (2) Quick Installation Guide (3) Software CD (User’s Ma

74 Chapter 5 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr and *.avf video file. It allows you to adjust the

75 Name Function (14) Effects  Gray Scale: convert the image into black and white (monochrome).  Normalize: adjust the brightness intensity. 

76 Chapter 6 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature

77 6.1 Familiarizing the Buttons in PCViewer 6.1.1 PCViewer Screen Right-clicking on the PCViewer video screen, enables you to start video recordin

78 6.1.2 PCViewer Control Panel Name Function (1) Select cameras to view Select to the view camera from different server. In Select Cam

79 Name Function (9) 2-Way Audio Enable/disable 2-way audio function. This function allows the client and server to talk via internet using MIC.

80 6.1.3 To Setup Remote System Setting The setting here applies to Remote DVR only. 6.1.3.1 System Setting In the System Setting windows, click Up

81 (5) Login Enable the conditions in Login section you want the system to automatically carry out. - Auto record when login Automatically start v

82 6.1.3.2 Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to save and appl

83 (5) IP Camera Information To setup IP camera and display current IP camera information. IP Setting: Click IP setting to add the IP camera. 1.

3 1.1.5 Optional Accessories IR extended cable 1.2 Front Panel 1.2.1 EH1004H-4 Nano/EH1008H-4 Nano Name Function (1) System Power indicator

84 Analog Camera Setting Select the camera from remote DVR servers to modify settings. In the Camera Setting windows, click Update to save and apply

85 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting windows, click Update to save and apply the new settings, cl

86 Enter the user id that for connecting authority - Password Enter the password that is for connecting authority - Channel Select the channel of c

87 - Motion Recording Start recording the video from the selected camera only when the system detects movement. Once a motion is detected, the s

88 Analog Camera (1) Camera Icons Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL check

89 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco

90 6.1.3.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click

91 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

92 6.1.3.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm s

93  System Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the