Aver FV2006 user manual Manual de usuario

AVer FV2006 User Manual

4 Package contents Item Descriptions 1. FV2006 2. Accessory pack 3. Conversion ring 4. Power Adaptor(DC 12V/0.5 5. CD (User’s Manual, Quic

5 ENGLISH Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)

6 Hardware Installation and I/O Pin Assignment 1. Set the camera  Locate cable from bottom a. Use three screws to lock the base of camera on t

7 ENGLISH Locate cable from side a. Open the conversion ring package in accessory. It includes a conversion ring and two set of screws. b. Use thr

8 2. When removing the dome cover, you can see the Micro SD card slot and the reset button. 3. I/O Interface I/O Connection a. Please connect the

9 ENGLISH Power Over Ethernet (PoE) Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power into a standar

10 IP Assignment There are two ways to find IP Camera: − Finding IP Camera by using “NXU Lite recording software” − Finding IP Camera by using “AVe

11 ENGLISH 3. Click “Setup” button. 4. Click “Add IPCam” button. 5. Select “IP Camera” item.

12 6. Key in IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In Search Result window, click it th

13 ENGLISH Finding IP Camera by using “AVer IPCam Utility” 1. Use the software, “AVer IPCam Utility” to assign the IP address of the IP camera. The

14 5. The IE browser will open and direct you to IP camera login page. This requires IPViewer.ocx to run. If the IE ActiveX warning message appears,

15 ENGLISH Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time w

16 IP camera IP addresses: A quick way to access remote monitoring is to double-click on a selected IP camera in “Camera Name list” in AVer IPCam

17 ENGLISH Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX

18 5 When the following dialogue box appears, click “Yes”.

19 ENGLISH Using the IP Camera Browser Interface The admin have the full access to the IP camera browser interface. The menu on the left, you can ex

20 Name Function (2) Login IP Show PC’s IP address (3) Bandwidth Show current IP camera’s transmitting bandwidth (4) FW Version Show IP camera

21 ENGLISH Name Function (14) Direction Controller Move the position of the view point while in zoom mode. User has to zoom in first.

22 System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time settings.

23 ENGLISH Name Function (4) Firmware Upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the fil

Table of Contents PREFACE ...PRODUCT SPECIFICATIONS ...

24 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fil

25 ENGLISH Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting

26  Add user: Enter the user name in “Username”, the password in “Password”, and re-enter the password in “Confirm”. Then, click “Add/Set”.  Use

27 ENGLISH System > Network Setting > Setting  Device Name: Used to name the IP camera to search more easily for this specific one among all

28 System > Network Setting > Sever Used to send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out the video

29  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Namecolumns. b. If

30  Status - Common warning message: Updating! Failed(1), Please check your DNS setting. Failed(2), Please check your internet connection. Failed(

31 ENGLISH System > Network Setting > Other 1 User may need to assign different port to avoid conflict when setting up IP assignment. Click A

32 (base64) mode to enable security mechanism  RTSP Port: setup port for RTSP transmitting (Default: 554)  RTP Start and End Port: in RTSP mode, yo

33 ENGLISH System > Network Setting > Other 2 Multicast Setting (based on the RTSP Server): User can setup two streaming based on the RTSP S

SYSTEM > NETWORK SETTING > SEVER ... 28 SYSTEM > NETWORK SETTING &

34 Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Select all

35 ENGLISH Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video

36 [Notice] a. If the received image is not from the required IP camera, please adjust the value. (Change either IP Address or Port number) b. If

37 ENGLISH  Bonjour: This function enables MAC systems to link to this IP Camera. Please key in the name here.(Safari supports Bonjour protocol) 

38 System > Advance > HTTPS HTTPS (Hypertext Transfer Protocol Secure): Https can help protect streaming data transmission over the internal o

39 ENGLISH Created Request: Setting the secure identification and apply it. There are two ways to set Certificate- Install Signed Certificate or Cr

40 System > Advance > SNMP SNMP (Simple Network Management Protocol) provides a simple framework for administering networked hardware. To mana

41 ENGLISH  SNMPv3: For data security reason, the authentication and encryption assurances are added when developing SNMPv3. The user has to give n

42 System > Advance > Access list You can deny an IP address or a range of IP address so that they cannot access the IP camera. Tick the "

43 ENGLISH System > Advance > QoS/DSCP QoS/DSCP (Quality of Server/Differentiated Services Code-point) specifies a simple mechanism for classi

NETWORK CONFIGURATION ...FACTORY DEFAULT ...

44 System > Image Admin and operator levels can adjust the Image setting. There are 4 tabs: OSD, Preference, Advanced, and Privacy

45 ENGLISH System > Image > Preference In Preference tab, you can tune the IP camera white balance, change the video orientation, and adjust

46 System > Image> Advanced Click Default button will back to factory default setting.  Shutter Time: Adjust the shutter time level to get th

47 ENGLISH Option Shutter Time Range (sec.) Indoor NTSC: 1/125 ~ Selected number in "Sense-up" PAL: 1/100 ~ Selected number in "Se

48 System > Image> Privacy Mask For the security purpose, there are three areas can be setup for privacy mask. Click Area #(Area 1, Area 2, Are

49 ENGLISH System > Video Stream > General Video System: Select the video format: PAL or NTSC System > Video Stream > Stream1  Basic M

50 − Rate Control: There are CBR (Constant Bit Rate) and VBR (Variable Bit Rate) to use.  CBR: 32Kbps~8Mbps (the higher the CBR is, the better the

51 ENGLISH System > Video Stream > Stream2  Basic Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can be c

52  Advanced Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can be chosen – 1920x1080, 1280x720, 640x480, 320x24

53 System > Video Stream > Stream3 3GPP Streaming is designed for mobile viewing.  Stream 3 Setting: Enable or Disable 3GPP Streaming.  3GP

54 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera while connected to a microphone to remote site; User c

55 ENGLISH System > SD Card Please insert microSD/SDHC card before use it. Make sure pushing microSD/SDHC card into the slot completely.

56 Event > Arrangement > Motion Motion Detection: IP camera allows 3 areas motion detection. When motion is triggered, it can send the video to

57 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its record si

58 Event > Schedule  Schedule: After complete the schedule setup, the camera data will be recorded according to the schedule setup.  Snapshot: A

59 ENGLISH Event > DI/DO IP camera supports 1 input/1 output (depending on different models). When input is triggered, it can send the video to s

60 Output Setting: Mode setting: OnOff Switch: Relay status is based on sensor triggered times. Time Switch: To restore the origin

61 ENGLISH Network Configuration  Configuration 1 a. Internet Access: ADSL or Cable Modem b. IP address: More than one real IP c. IP camera a

62  Configuration 2 a. Internet Access：ADSL or Cable Modem b. IP address：one real IP c. IP camera and PC connect to the internet d. Device need

63 ENGLISH Factory Default 1. To recover the default IP address and password, please follow the following steps. 2. Remove power and Ethernet cabl

1 ENGLISH Preface The FV2006 is an H.264, 10800p super min vandal proof dome camera designed ultra-discreet, recessed-mount and super

64 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for FV2006.

65 ENGLISH Appendix FV2006 is compliant with microSD/SDHC card and to ensure recording quality, and please use memory cards over 2G and

66 COPYRIGHT © 2013 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted

67 Limited Warranty AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation f

68 Governing Law and Your Rights This warranty gives you specific legal rights; You may also have other rights granted under state law. These rights

2 Hardware 2-Axis Gimbal Adjustments Angle Pan: 360∘ Tilt: 20∘~ 90∘ Dimensions Φ80 x 67 (mm) Operation Temperature 0°C ~ 45°C Weight 350g Networ

3 ENGLISH System Security Password protection, IP address filtering, HTTPS encrypted data transmission, QoS/DSCP Firmware upgrade HTTP mode, can be