Aver SecureCenter Manual de usuario

SecureCenter Central Management System User’s Manual V1.1.1.1

5 1.1.2 Graphic card with NVIDIA chipset 1. Click the NVIDIA nView, and select the Dualview mode. 2. Adjust each monitor resolution to 1280 x 800

6 Chapter 2 Software Installation This chapter describes how to install the SecureCenter software. - Before installing the software, make sure th

7 2.2 Installing the SecureCenter Software in Windows 7/8 DO NOT install SecureCenter application and ExpressGO application on the one computer sy

8 Chapter 3 Using the SecureCenter 3.1 Running theSecureCenter Software To run the application, double-click on your PC desktop or clic

9 3.2 Using the SecureCenter Application When an alarm occurred on the NVR server, the video is transmitted to the SecureCenter and display on the

10 Name Function (5) Network Enable/disable the remote alarm data received. This is activated automatically when the SecureCenter software starts up

11 Name Function (14) Log viewer List the entire info in event mode or text mode from all NVR servers. (15) Status Display the current date, and ti

12 3.3 Using the Monitor When user has setup the monitor set in Channel Setting (see also Chapter 4.3), then click Monitor to view all selected cam

13 3.3.1 Using the Monitor Controller User can use Monitor Controller to switch different monitor set for monitoring and add/delete the channel in

14 7. To change the monitored channels’ position, please delete the monitored channels and drag the channels to the new position. To delete channel

COPYRIGHT © 2014 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted in

15 3.3.2 Familiarizing the Buttons in PTZ Camera Control Panel Name Function (1) Close Exit PTZ camera controller. (2) Camera preset position numb

16 3.3.3 Live Playback the Recorded Video User can playback recorded video immediately while monitoring from the local SecureCenter server if the r

17 Button Function Begin: Move at the beginning of video. Slower: Play the recorded video file at the speed of 1/2X, 1/4X, 1/8X, or 1/16X. Pause

18 3.4 Using the MiniCenter Viewer In Minicenter, user could configure, backup, operate the remote NVR, reset alarm and change priority of alarm, a

19 Name Function (5) Remote I/O To view sensor and relay, also to turn on/off relay on remote NVR. Select the relay and right click to turn on /off

20 3.4.1 Remote Backup Remote Backup is purely for backing up the *.dvr file from the NVR sever. You can select between Auto Backup and Manual Back

21 Manual Backup: 1. Click Remote backup button from Minicenter UI. 2. Select the NVR server and click Modify button. 3. Select the Manual Backup

22 6. To execute manual backup, select the file first. Click File Select and select the files that user wants to backup and click OK. 7. Then, cli

23 6. Click Add to select the date, start/end time, and channel that user wants to backup. After selecting, click OK to confirm. User can add multi

24 3.5 To Search the Alarm Event User can search the alarm event by the conditions. Set the follow conditions to search the wanted alarm events. 

Manual Conventions The following conventions are used throughout this manual. The caution symbol is intended to alert the user of the importance o

25  State: select the alarm status that wants to search  Operator: select the operator that wants to search  Keyword: enter the specific word

26 3.5.1 Editing the Alarm User can select the alarm to assign to different operator, change the priority of alarm, and change status of alarm. 1.

27 4. Record of changes is displayed in Note column. 5. Click Run MiniCenter button to call out MiniCenter window(also see Chapter 3.4)

28 Chapter 4 Customizing the SecureCenter System In the SecureCenter application, click the button to customize the SecureCenter system. In the

29 (1) Alarm Network Port Select a port for receiving alarm video from NVR server. Any network service port can be assigned as long as the port does

30 (3) Miscellaneous  Date Format : Select from different date formats 1. Click Setup. 2. In the Authorization dialog box, enter the administra

31  Upgrade – To update the firmware of the System Controller. Click Upgrade button and click Select File button. And then, select the firmware fil

32 (4) Attention Please Check the attentiveness of the person who is monitoring the system. You may set the number of times the Attention dialog box

33 (10) Monitor Text Setting Enable/disable the camera information display and display position on the monitor screen. To configure font, click .

34 4.2 NVR Setting Display the list of all NVR servers. User may add up to 16 NVR servers, delete and modify the NVR setting. 1. Click Setup from

TABLE OF CONTENTS CHAPTER 1 INTRODUCTION ... 1 1.1 Dual Monitors settin

35 4.3 Channel Setting Select the camera from different NVR servers in order to monitor on same screen. The selected cameras will be displayed on Mo

36 11. After the Monitor set has created, select the NVR server. Then, the cameras of the NVR server will display on the Camera Select window. User

37 17. In Monitor Layout window, user also can set the channel for specific type functions. In Monitor Layout window, select one of blank channel

38  Sequence: Set the selected channel to automatically switch to display all camera channels in cycle.  Matrix: set the selected channel to rece

39 4.4 Schedule Setting Schedule to record or backup of all the cameras either weekly or one time. 1. Select the Monitor set for scheduling. i Th

40 4.4.1 To set schedule at a specific portion of time in that hour: 1. Right click the colored blocks. 2. In the Select time dialog box, click

41 4.5 Backup Setting Backup the recorded files from NVR server. 1. Select the NVR that wants to backup. 2. Select the date of the recorded file

42 6. Enable Include player when backup that will included a player program for playback backup file in backup folder when backup. Only administrato

43 4.6 E-MAP Setup Holds up to 64 maps in *.bmp/*.jpg format. The map is hierarchy in structure and users can add a map on another map. User also ma

44 - (8) Show the name of selected map. - (9) : Add a NVR server icon on the map. (see also Chapter 4.6.3) - (10) : To save the setting and exit

4.6.1 To Set Up the E-Map ... 43 4.6.2 Add a New Map ...

45 4.6.2 Add a New Map 1. Click Setup in SecureCenter main UI. 2. In the Authorization dialog box, enter the administrator User ID and Password 3.

46 4.6.3 Add a NVR Server 1. Click Setup in SecureCenter main UI. 2. In the Authorization dialog box, enter the administrator User ID and Password

47 4.6.4 To Use the E-Map When the alarm has been activated, the NVR icon blinks and turns red. 1. On the SecureCenter main UI, click E-map or pre

48 NVR Watch UI i Right-click on channel screen can select Remote I/O selection to view the channel I/O and edit relay status.

49 4.7 Alarm Setting In the Alarm Setting dialog box, just select and enable the condition for the system to alarm and the action for the system to

50 4.7.1.1 To Setup the Call Out List To use this feature, the PC must have a voice modem connected to it. The supported audio system is only 8KHz a

51 4.7.1.2 To Setup the Send E-Mail Setting Next to the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exit and s

52 4.7.1.3 To Setup the Alarm Sound Setting 1. Next to the Play Warning Sound check box, click Detail. 2. In the Alarm Sound Setting dialog box,

53 4.7.1.5 To Set the MMS/SMS Setting To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial COMM port of PC. Nex

54 4.7.1.6 Popup Video The Popup video will co-work with alarm condition of Receive Alarm. When user selects the alarm condition of Receive Alarm, a

1 Chapter 1 Introduction The AVer SecureCenter is a central monitoring system that enables user to monitor up to 16 NVR servers through an i

55 On the upper right corner of popup video window, there two figures that are to represent nailed popup video window and mini center function. To cl

56 4.8 User Setting SecureCenter supports 256 user account that includes operator and administrator account. 1. Select the Authorization Level – Op

57 Chapter 5 Using the Playback Function User can choose to playback video stored on the local hard disk or download the video from the remote side

58 5. For Download and Playback, the numbers from 00 to 23 represent the time in 24-hour in the Remote Playback Date/Time Selection window. The numb

59

60 5.2 Using the Local Playback Application Name Function (1) Exit Close the Player. (2) Visual Search Search from a specific camera by Date, Hour,

61 Name Function (9) Playback Control Buttons (Rewind): Wind back the recorded video file. (Pause): Briefly stop playing the recorded video file.

62 Name Function (14) Event Log Show the record of activities that take place in the system. To filter the records, select and click the option butto

63 5.3 Using the Download and Playback Application Name Function (1) Exit Close the player (2) Visual Search Search from a specific camera by Dat

64 Name Function (6) Bookmark Mark a reference point when previewing the recorded video file to which you may return for later reference. You may als

2 1.1 Dual Monitors setting Video configuration is different for each different VGA chipsets. Please follow the steps below to setup the dual monit

65 5.4 Using the RealTime Playback Application Name Function (1) Exit Close the Player. (2) Camera ID Show the number of cameras that are being vie

66 Name Function (5) Playback Control Buttons (Next): Go to the next frame. (End): Go to the end of the recorded video file. (6) Date Selection Sel

67 Name Function (12) Export Snapshot: Capture and save the screen shot either in *.jpg or *.bmp format. 5.5 To Search Using the Visual Search 1.

68 5.6 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intellige

69 5.7 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text (r

70 5.8 To Bookmark a Section of the Video 1. Click Bookmark. The video playback stops when the bookmark button is executed. 2. In the Bookmark dia

71 5.9 To Cut and Save the Wanted Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar a

3 3. If user selected Basic mode, press the Quick Settings tab. Then select the Select a different desktop mode and click Go. 4. Select the Exten

4 5. If user selected the Advanced mode, click the View button. 6. In Display Manager, right click on the second Display on the right side and sel